Prinhead Cartridges
Cleaning Equipment
deutsch
 
     
 
ShopTester200
Testing
Non Printhead Cartridges
Prinhead Cartridges
Filling
Cleaning
High Volume
 
Supplies
Shop Tools
2nd Hand
Spare Parts
 
Company
Contact
 
Newsletter
FAQ
Welcome
Sitemap

ShopClean 55 Atomizer(Nozzle only) « back

Reduced to the max! Universal nozzle plate cleaning unit (jet atomizer) for all cartridge types. Cleaning of the print head from the nozzle up to the firing chamber and release of dried ink and pigments. Small footprint! Only air pressure (60-90psi) required! Direct hook up to the air compressor.

- most effective and smooth cleaning!
- for use with cleaning fluids
- spray angle 10° for optimised cleaning effect
- micron size drops generated
- stainless steel atomizer nozzles and housing
- fluid consumption at 3 bar/45psi = ~25ml



In earlier times most of the cleaning was made with steam. However by too close steaming the print head was damaged because of high temperature. On the other hand, by steaming too far the only effect was the wettening of print head!
After intensive research we found an atomizer spray which gives a high cleaning effect without damaging the print heads!
All our JetCleans are equipped with this highly effective atomizer spray to give the highest possible cleaning results without damaging the temperature sensitive print heads.


Technical datas:
Airpressure: 3-5 Bar from air compressor
Drop size: micron-atomizer
Spraying angle: 10°
Housing: Stainless steel
Suction tube: DE Water or cleaning fluid
Fluid cons. at 3 bar/45psi: ~25ml/min.



 
Print this page Disclaimer info@cbr-e.com · Phone +41 61 375 9060